45 Degree Handpiece Kavo Type Quick Coupling
45 degree kavo handpiece Advantage
1. 45 degree head for improving accessibility to areas at the rear
of the mouth; special slot of the handpiece to let the air out
avoiding to hurt the throat of patients.
2. German ceramic balls bearing; open style cartridge
3. Six spray, effective cooling for bur and treating contact
surface
4. Push button type to change bur, easy and convenient
5. sterilized in 135℃ to avoid cross-infection.
6. Kavo type 6 holes fiber optic quick coupling, easy to exchange
handpiece for dentist and improve working efficiency
45 degree kavo handpiece Technical Data
| Model |
DR-145K |
| Bur Applicable | Φ1.59mm-Φ1.6mm |
| Rotation Speed |
300,000~350,000rpm |
| Head Diameter |
Φ10.8mm |
| Cartridge |
German Ceramic Bearing |
| chuck system |
Push button |
Packaging and shipping
1, Each item will be strictly checked by QC, providing more care
for your items.
2, Each carton will be well wrapped and given advance tests in
order to make the cargo delivered to your door without any damages.
3, If you need, we can also do your own package & logo printed.
Our services:
1.100% pre-tested before delivery.
2.1:1 replacement for any defective caused by our factory.
3. Specialized in exporting dental equipment with professional
sales team.
4. Excellent customer service and technical support.
Product image
After each patient use , maintenance should be done as follows:
1. First remove the diamond burs , and clean up all the teeth on
dental handpieces precipitate
2. Use a metal needle to clean the spray holes and fumaroles
Note: The spray holes and diamond burs into 40 -degree angle ,
fumaroles and diamond burs to a 30 degree angle
3. Place the clean lubricating oil is sprayed into the axial hole
1-2 seconds ( diamond burs is plugged holes )
4. In the bottom of the handpiece were ( with / without quick
connector ) two kinds of styling , make the right amount of
lubricant is injected into the bottom
5. The handpiece with quick connector combination ( first determine
the water switch is turned off )
6. Replace the diamond burs , surrounded by white silk cloth
handpiece head ( make sure the needle does not touch the diamond
burs and white gauze , so as not to tie )
7. pedal depressed for about 20 seconds , look at whether there is
in white gauze on any stain. If there are stains on the white gauze
, again, add oil , starting from item 4 continued routine
maintenance , know that white gauze until no stain
8. Finally, no more than 135 degrees Celsius temperature and high
pressure sterilization
Instruction:
After each treatment,Sterilizing handpiece in autoclave according
to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of
handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air
inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.
